Skip to content
D-FENCE Electronic Fencing and Security Systems Ltd.D-FENCE Electronic Fencing and Security Systems Ltd.
EN
Talk to an expert

The threat · Copper cables being stolen?

D-Cable

Patented sensors on clamps, troughs and cabinets raise the alarm the moment copper cable is cut, pulled or unbolted.

Patented
Cut · pull · lift alarmSolar + SMS optionOpen C2 integration
Discuss your project Catalog

For integrators & consultants

L5LayerCritical assets
DatasheetPDF · 270 KBTender specification textCopy text
D-FENCE render on a real railway-bridge photo: an intruder reaches for the cable trough and the sensors along the trough cover raise the alarm

Stop cable theft at the first pull.

Cable theft is fast and hard to see. The damage goes beyond the stolen copper: energy, rail and telecom networks lose service, and the site becomes a safety risk.

01

Alarm at the first pull

A cut, a pull or a lifted cover raises the alarm the moment it happens.

02

The whole cable path, one system

Clamps, troughs and cabinets are protected together, not by standalone devices.

03

Made for remote sites

Runs on solar with SMS transmission and reports to your control room or mobile.

D-Cable puts D-FENCE strain-gauge sensors where a thief has to work: patented clamps on the cable run, sensors on and under trough covers, and D-Bolt sensing bolts on cabinet anchors and doors. A cut, a pull or a lifted cover raises an alarm, triggers the camera and alerts the control room.

Standalone sensors are not enough against real-world theft, so D-Cable protects the whole cable path as one system: physical protection plus electronic detection. It connects to your existing command and control or to any device you specify, and runs from any power source, including solar with SMS transmission for remote sites.

From the first touch to the right response.

  1. Sensors on the cable path

    Patented clamps on conduits, sensors on trough covers, D-Bolt anchors on cabinets.

  2. Force detected

    The strain-gauge sensor registers a cut, a pull, a lifted cover or a loosened anchor.

  3. On-site response

    The local siren and the camera are triggered at the same moment.

  4. Control room

    The alarm reaches D-Command Control, your existing C2 or an SMS recipient.

Seen in full.

Every image opens full size. Product sheets are shown whole, exactly as D-FENCE publishes them.

FIG. 01Clamp sensor on a cable run, field installation
FIG. 02Railway cable-trough pilot: sensor fitted under the cover
FIG. 03Sensor units on a railway-bridge cable trough
FIG. 04Inside the trough, above the cables

Specifications & documents.

SpecificationsD-Cable
Protected elements
Cable conduits and trays, cable troughs and covers, telecom and power cabinets
Sensing technology
D-FENCE strain-gauge pressure sensors
Detects
Cable cut, pulled or unbolted; cover lifted; cabinet opened or unbolted
Configuration
Physical protection + electronic detection, designed per site
Alarm chain
Local siren · camera · SMS alert to the control room
Power
Any power source, including solar
Communication
SMS transmission; connection to existing command and control
Cabinet sensors
D-Bolt (see the D-Bolt specifications)
Patent
Patented

Specification text, ready for your tender.

Copy it into your specification. It describes the system by what it must do, so any alternative has to meet every point.

D-CableTender specification textDatasheet

  1. General

    The system shall be D-Cable by D-FENCE Electronic Fencing and Security Systems Ltd. (ISO 9001:2015 certified quality management), or an approved equivalent that meets every requirement in this section.

  2. Function

    Patented sensors on clamps, troughs and cabinets raise the alarm the moment copper cable is cut, pulled or unbolted.

  3. The system shall provide

    • Patented cable clamp: Holds the conduit and senses the force on it: cutting, pulling or unbolting the run raises the alarm.
    • Trough and cover sensing: Sensors on and under trough covers detect a lifted cover or an entry into the trough.
    • Cabinet anchoring with D-Bolt: Sensing bolts on the cabinet anchors and door, with the sensor cable in a spring guard.
    • Alarm chain built in: One event triggers the local siren, the camera and an SMS alert to the control room.
    • Remote-site ready: Any power source, including solar, with SMS transmission.
    • Open integration: Connects to your existing command and control or any device you specify.

  4. Technical requirements

    • Protected elements: Cable conduits and trays, cable troughs and covers, telecom and power cabinets
    • Sensing technology: D-FENCE strain-gauge pressure sensors
    • Detects: Cable cut, pulled or unbolted; cover lifted; cabinet opened or unbolted
    • Configuration: Physical protection + electronic detection, designed per site
    • Alarm chain: Local siren · camera · SMS alert to the control room
    • Power: Any power source, including solar
    • Communication: SMS transmission; connection to existing command and control
    • Cabinet sensors: D-Bolt (see the D-Bolt specifications)
    • Patent: Patented

  5. Detection sequence

    1. Sensors on the cable path: Patented clamps on conduits, sensors on trough covers, D-Bolt anchors on cabinets.
    2. Force detected: The strain-gauge sensor registers a cut, a pull, a lifted cover or a loosened anchor.
    3. On-site response: The local siren and the camera are triggered at the same moment.
    4. Control room: The alarm reaches D-Command Control, your existing C2 or an SMS recipient.

  6. Submittals

    Before installation, the contractor shall submit the manufacturer's datasheet, the installation instructions and the zone layout for approval.

Discuss your project.

Tell us the site, the threat and the line. D-FENCE engineers will propose the right barrier, sensor and platform, ready for your integrator.

Discuss your project WhatsApp

Build the full line.

All products
D-Bolt sensing nut on the flange bolt of a water valve, armoured cable running to the control card
InfrastructureEquipment protection · sensing boltPatented

Equipment unbolted and stolen at remote sites?

D-Bolt

A strain-gauge sensor built into the nut: any attempt to loosen, bend or cut the bolt raises an alarm with its location.

M14–M22 nutsIP65 / IP6810-year sensor warranty
View product
Stainless-steel D-Palisade sensor bolted where the rail meets the post of a dark pale fence, among climbing plants
Perimeterlinear infrastructurePatented

Vandals forcing your cable tunnels and fences?

D-Palisade

A patented stainless-steel sensor that turns cable tunnels, pipelines and palisade fences into barriers that report forced damage.

Stainless steelDual-chip sensorNo routine maintenance
View product
D-Command Control in alarm: the Station 1 zone turns red on the 3D map and the fence camera opens beside it
Command, AI & cyberCommand & control · C2 platformOpen APIPlug & Play

Alarms lost between separate systems?

D-Command Control

Every sensor, camera and alarm on one geolocated map, in the control room or on a phone.

< 3 s to alert16 × 16 sensors per gatewayUp to 13 sites
View product